For PCs running Windows XP:
- Click on this link ePad-vision_Firmware_Upgrade_4.30_WinXP. A File Download window will open.
- Click on the Save button. A Save window will open.
- Select the folder in which you want to save the file, then click Save.
- The file will be downloaded; this may take several seconds. After the download is complete, a Download Complete window will open.
-
Make sure that your ePad-vision device is connected to your PC.
Click on the Run button, and the firmware upgrade process will be performed.
THE FIRMWARE UPGRADE PROCESS TAKES SEVERAL SECONDS TO COMPLETE; DO NOT INTERRUPT THE PROCESS.
During the upgrade process, an ePad-vision Firmware Update Utility window will open and display the progress of the upgrade, and the LCD on the ePad-vision device will flash on and off. When the upgrade process is complete, the window will disappear, and the screen of the ePad-vision device will display its welcome page showing the new version of the firmware.
For PCs running Windows 7 32-bit:
- Click on this link ePad-vision_Firmware_Upgrade_4.30_Win7-32. A File Download window will open.
- Click on the Save button. The file will be downloaded; this may take several seconds.
- Make sure that your ePad-vision device is connected to your PC.
-
When the download has completed, open the
"downloads" folder, right click on the ePad-visionFWUpdate.exe icon and
select "run as administrator" to launch this program.
THE FIRMWARE UPGRADE PROCESS TAKES SEVERAL SECONDS TO COMPLETE; DO NOT INTERRUPT THE PROCESS.
During the upgrade process, an ePad-vision Firmware Update Utility window will open and display the progress of the upgrade, and the LCD on the ePad-vision device will flash on and off. When the upgrade process is complete, the window will disappear, and the screen of the ePad-vision device will display its welcome page showing the new version of the firmware.
For PCs running Windows 7 64-bit:
-
The ePad-vision firmware update program that
runs on Windows 7 64-bit requires that the 64-bit Universal Installer be
installed on your PC. To determine the version of the Universal
Installer on your PC, go to Control Panel\Programs and Features and look
at the ePadLink 10.x entry.
- If this entry indicates that you are using the 32-bit Universal Installer, then you must uninstall the 32-bit version of Universal Installer as follows: go to Control Panel\Programs and Features, select the ePadLink ePad 10.x entry, and click uninstall. Then install the 64-bit version of UI10.3, using the following link: http://www.epadsupport.com/downloads/drivers/10.3_r11431/UI10.3R11431setup(x64).exe
- If this entry indicates that you are using the 64-bit Universal Installer, then proceed to the next step.
- Click on this link ePad-vision_Firmware_Upgrade_4.30_Win7-64. A File Download window will open.
- Click on the Save button. The file will be downloaded; this may take several seconds.
- Make sure that your ePad-vision device is connected to your PC.
-
When the download has completed, open the
"downloads" folder, right click on the ePad-visionFWUpdate_x64.exe icon
and select "run as administrator" to launch this program.
THE FIRMWARE UPGRADE PROCESS TAKES SEVERAL SECONDS TO COMPLETE; DO NOT INTERRUPT THE PROCESS.
During the upgrade process, an ePad-vision Firmware Update Utility window will open and display the progress of the upgrade, and the LCD on the ePad-vision device will flash on and off. When the upgrade process is complete, the window will disappear, and the screen of the ePad-vision device will display its welcome page showing the new version of the firmware.
Important Notes: During the firmware update, you may see the following message appear: "Device driver was not successfully installed" You may ignore this message. The ePad-vision DFU driver will be installed during the update.
